SONIC TIME CAPSULE • LISTENER GUIDE

LISTENER AUDIO TIPS

A FEW SIMPLE SETTINGS CAN MAKE A BIG DIFFERENCE
GET THE MOST FROM YOUR SOUND
RECOMMENDED WINDOWS PLAYBACK SETTING

24-BIT / 48 kHz

GIVE YOUR AUDIO MORE BREATHING ROOM
On compatible Windows PCs, sound cards, DACs and audio interfaces, try setting your playback device to 24-bit / 48,000 Hz. Depending on your system, you may hear a more open and spacious presentation, improved separation and greater clarity.

MORE BREATHING ROOM

Your playback device and Windows audio settings can influence what you hear. These are simple suggestions worth trying — not requirements.

TIP 01 • WINDOWS AUDIO

Try 24-bit / 48 kHz

If your playback device supports it, compare 24-bit / 48 kHz with your current Windows setting. On some systems the result can sound more open, spacious and relaxed, with clearer separation between elements in the mix.

TIP 02 • TRUST YOUR EARS

Compare Both Settings

Play the same Sonic Time Capsule program while switching between your previous setting and 24-bit / 48 kHz. Audio hardware and drivers differ, so use the setting that sounds best on your own system.

TIP 03 • CONNECTION

Wired When Possible

A wired connection to headphones, speakers, a DAC or audio interface can provide a more direct playback path. Bluetooth can still sound very good, but the device may apply its own codec and audio processing.

TIP 04 • PROCESSING

Check Enhancements

Windows, sound-card utilities and headphone software may add enhancement, surround, EQ or spatial processing. Try listening with those features off as well, then keep the configuration you prefer.

HOW TO CHANGE IT

Follow this complete path to the playback format setting. Windows versions and audio drivers can look slightly different, so an alternate route is included below.

1
Right-click the speaker icon in the Windows taskbar near the clock, then choose Sound settings.
2
In System > Sound, scroll down and open More sound settings. This opens the classic Sound control panel.
3
Select the Playback tab. Find the device you actually listen through — such as speakers, headphones, a DAC, USB audio interface or sound card.
4
Select that playback device and click Properties.
5
Open the Advanced tab. Under Default Format, open the drop-down menu.
6
If your device offers it, choose 24 bit, 48000 Hz (Studio Quality).
7
Click Apply, then OK. Return to Sonic Time Capsule and listen to a familiar program or mix.
8
Compare the sound with your previous setting. Listen for openness, separation, clarity and the sense of breathing room around the music.
ALTERNATE WINDOWS ROUTE: Open Control Panel > Hardware and Sound > Sound > Playback, select your playback device, then choose Properties > Advanced > Default Format.
CAN'T FIND 24-BIT / 48 kHz? Not every playback device or driver provides the same format choices. If 24-bit / 48 kHz is not listed, use one of the formats supported by your device.
TECHNICAL NOTE: This is a playback-device recommendation. Selecting 24-bit / 48 kHz does not add information that is not present in the original broadcast or podcast. It changes how your PC processes and outputs the audio, and results can vary with the sound card, DAC, interface, driver, headphones and speakers being used.

THE FINAL TEST

YOUR SYSTEM • YOUR ROOM • YOUR EARS

There is no single playback setting that will sound identical on every system. Use these tips as a starting point, compare carefully, and keep the configuration that gives Sonic Time Capsule the most natural, open and enjoyable sound on your equipment.